LivinBox Storage Products Co. 18 User Manual download pdf (Page 17)

REFRIGERATOR LOCATION

Do not install the refrigerator where the temperature will go

below 60°F. (16°C.) because it will not run often enough to maintain

proper temperatures.

Do install it on a floor strong enough to support it fully loaded.

To keep energy costs down, avoid locating the refrigerator next to the

range or a heating vent.

Care and Cleaning Location Clearances Rollers

CLEARANCES

Allow the following clearances for ease of installation, proper air

circulation and plumbing and electrical connections:

Sides ..........................................................................3/4″ (19 mm)

Top.............................................................................1″ (25 mm)

Back...........................................................................1″ (25 mm)

If Model 19, 22, or 25 is to be installed against a wall on the hinge side,

allow 1

⁄

″ (44 mm) for door clearance.

ROLLERS

(on some models)

The rollers have three purposes:

1. Rollers can be adjusted so the door closes easily when opened about

halfway. (Raise the front about 3/4″ (19 mm) from the floor.)

2. Rollers should be adjusted so the refrigerator is firmly positioned on

the floor and does not wobble.

3. Rollers allow you to move the refrigerator away from the wall for

cleaning.

To adjust the rollers:

1. Remove the base grille by

grasping the bottom of the

grille and pulling it out.

2. Turn the two front roller

adjusting screws clockwise

to raise the refrigerator,

counterclockwise to lower it.

3. To replace the base grille,

line up the clips on the back

of the grille with the openings

in the base plate and push

the grille forward until it

snaps into place.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 91 92

No comments

LivinBox Storage Products Co. 18 User Manual Page 17