LivinBox Storage Products Co. 18 User Manual download pdf (Page 16)

CARE AND CLEANING

(continued)

Preparing for Vacation Preparing to Move

For shorter vacations, remove perishable foods and leave

controls at regular settings. However, if room temperature is

expected to drop below 60°F. (16°C.), follow the same instructions

as for extended vacations.

For long vacations or absences, remove food and shut off the power

to the refrigerator. Move the fresh food control to the “OFF” position,

and clean the interior with a baking soda solution of one tablespoon

(15 ml) of baking soda to one quart (1 L) of water. Wipe dry. To

prevent odors, leave an open box of baking soda in the refrigerator.

Leave doors open.

Move icemaker feeler arm to STOP (up) position and be sure to shut

off water supply to the refrigerator.

Disconnect power cord from wall outlet, remove all food, and clean

and dry the interior.

Secure all loose items such as grille, shelves and storage pans by

taping them securely in place to prevent damage.

Be sure refrigerator stays in upright position during actual moving

and in van. Refrigerator must be secured in van to prevent movement.

Protect outside of refrigerator with blanket.

Water Supply to Icemaker (on some models)

If your refrigerator has an icemaker, or if you plan to add an icemaker later, the icemaker

will have to be connected to a cold water line.

A water supply kit containing copper tubing, shutoff valve, fittings and instructions is

available at extra cost from your dealer or GE Service and Parts Centers. There should

be sufficient tubing from the cold water supply to the icemaker inlet to allow moving the

refrigerator out from the wall several feet (approximately 8 feet [244 cm] of 1/4″ copper

tubing in three 10″ [25 cm] diameter coils).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 91 92

No comments

LivinBox Storage Products Co. 18 User Manual Page 16